In some cases, I have used putty and simply scraped away as much as possible so that it isn’t obviously visible, as shown in the first set of photos. But I have some thin geode slices sitting on clear plastic stands, and while quake putty was fine to stick the backs to the stands, even small dabs of putty on the stands’ feet looked bad showing through the clear plastic, as shown in these photos of the blue geode slide. I would usually use quake gel for clear objects but quake gel is runny, and doesn’t work well with very small feet of stands; it’s better for broad surfaces.
I solved this problem with one of my new quake-proofing friends, Gripeez. I’ve written about these magic clear sticky gel pads before and I keep coming up with new uses for them. (I have no financial ties to the company, and I imagine there are other similar products from other companies.) In this case, I cut small rectangles of Gripeez that were the size of the feet of my stands and put them under the feet, with quake putty sticking down the back rest of the stand that can’t be seen from the front. It took a bit of finessing to get the sticky things to remain on the feet without twisting as I removed my fingers before placing the stand on the surface, because they kept sticking to my fingers, but I managed to do it. It looks great!
 |
| Click the figures to see larger versions |
Because the Gripeez is thick (around 3 mm), the stand feet don’t rest directly on the shelf and the stand can move slightly from side to side, which isn’t ideal, but it seems to be holding this pretty well. In a large quake, it would probably come off, but I think this would discourage the objects from sliding or flying in a medium quake that might otherwise knock objects off shelves.
I also started using small pieces of Gripeez under the two lower corners of framed pictures if they were on maze picture hooks, to keep them straight, in my previous home. I used to use putty for that but the putty can leave shiny marks on some flat paint walls, and the Gripeez didn’t leave any trace on the paint in that home. However, some unexpected home repairs involving water damage have made me need to temporarily remove some of the framed pictures that I hung with maze hooks a few months ago in my current home, and I have found to my annoyance that the little squares of Gripeez that I had cut out and placed under the corners left the paint slightly shadowed, as if it was a little wet. I was annoyed to see this because the whole point of using these things instead of quake putty was to avoid shiny marks on flat paint, so seeing these shaded areas isn’t much better. In my old home, which had a similar paint job, the Gripeez left the paint absolutely unaffected, so I guess different paints react differently. I did notice that they are extremely sticky though, so very small squares should still be effective and might leave less noticeable marks.]
By the way, these Gripeez are also really fun to play with; as they are sticky and squishy and stretchy and can offer hours of entertainment to otherwise mature adults, based on personal experience…
>>back to blog